Note 8 Down Loading Update Over and Over Again

Update [March 27, 2019]: The stable version of Android Pie is now available for the users of Milky way Note 8 in the U.Southward. too. Starting with Sprint, the update is not available for the AT&T users besides.

We have the firmware available with the states of the Sprint's Note eight Pie update and have shared the download link of that below too. And so, if you lot have a Galaxy Note viii that comes with model no. SM-N950U, you tin upgrade to Android ix Pie manually using the firmware. If you are not receiving OTA update for the 1 UI based Android 9 Pie, installing the firmware manually is the all-time option.

The Pie update for the U.S. version of Milky way Note 8 comes equallyN950USQU5DSC1, also called DSC1 in short.

Update [February 15, 2019]: Samsung has finally released the stable Android Pie update for the Galaxy Note eight users. Global variant of the phone, SM-N950F/FD, is receiving the Pie update today.

The stable Pie update arrives as software version DSB2 (total version being N950FXXU5DSB2) and is already rolling out as an OTA update. We take provided the firmware file of the DSB2 update beneath, using which you can manually install the Pie update correct abroad without waiting for the OTA update. Discover the link in the downloads section beneath.

Update [February 11, 2019]: Android Pie beta 4 has been released for the Galaxy Note 8 users. identified every bit version ZSB2, the update fixes critical bugs with the ZSB1 update, which was released only a few days ago.

Update [February 08, 2019]: Milky way Note 8 users in Asia and Europe are receiving Pie update beta iii now. The software version of the third Android Pie beta update is ZSB1, or N950FXXU5ZSB1 in total.

The new ZSB1 update fixes problems with unlock using IRIS recognition, device hangs, force closes, etc. issues in different use cases of the phone. Problems with the fingerprint scanner and screen brightness have likewise been stock-still. The ZSB1 update is available for download below.

Related:

• Galaxy Note 8 firmware download
• Galaxy Note 8 Pie update news

• Downloads
• How to install Android 9 Pie update on Milky way Annotation eight [One UI update]

Downloads

• For model no. SM-N950F and FD (official stable update):
  • Version DSB2 – Official Android Pie stable 1 UI update, released on February fifteen, 2019
    • This is a firmware file, to be installed using Odin (Guide #ane below)
• For model no. SM-N950U (official stable update):
  • Version DSC1 – Official Android Pie stable I UI update, released on March 26, 2019
    • This is a firmware file, to be installed using Odin (Guide #ane below)
• For model no. SM-N950U1 (official stable update):
  • The stable version has not been released however.
  • But you tin can utilize the one for the U variant higher up for the time being. Yes, it will piece of work alright.

Alert!

This page is meant just for the Galaxy Note eight handset. Practise not try this on whatever other Samsung device or whatever other Android device.

How to install Android 9 Pie update on Galaxy Notation viii [One UI update]

Compatibility

This article is uniform merely with the Milky way Note viii. Practise non try this one any other Android device.

Pace by step guide

Step 1. Download the Android Pie firmware from the downloads section higher up. Make certain you lot have downloaded the rightfirmware file on your PC.

Step 2.InstallSamsung USB commuter (method 1 on the linked folio) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already washed this.)

Step 3.Also,download Odin PC software (latest version).

Step 4. Excerptthe firmware file now. Y'all can apply complimentary software similar vii-naught for this. Install vii-zip, then right click on firmware file and under 7-zip, select 'Extract here'. You should become files in .tar.md5format at present. (Yous may a bunch of files, and y'all will notice text like AP, BL, CP or CSC etc. written at the offset of those files.) We will be loading this file into Odin, to be installed on the device.

Step 5. Excerpt theOdin file. You should get the Odin exe file (other files could be hidden, hence non visible).

Pace 6. Disconnect your Milky way Notation 8 from PC if information technology is connected.

Footstep seven.Boot your Galaxy Note 8 intodownload fashion:

1. Power off your device. Wait for six-7 seconds subsequently the screen goes off.
2. Press and hold the three buttons Volume down + Bixby + Power together until you see the Warning screen.
3. Printing Volume Up to proceed to download mode.

Step 8.Double click on Odin.exe file (from footstep 5) to open up the Odinwindow as shown below. Be careful with Odin, and do only every bit said to prevent problems.

Step ix. Connect your device now using the USB cable. Odin should recognizeyour device. It's a must. When it recognizes, you will seeAdded!! message appearing in the Log box in the bottom left, and the first box under ID:COM will also show a no. and plough its background bluish. Expect at the pic below.

• You cannot proceed until you go the Added!! message, which confirms that Odin hasrecognized your device.
• If you don't get Added!! message, you demand to install/re-installdrivers again and use the original cable that came with the device. Mostly, drivers are the problem (look at pace 2 above).
• Y'all can try different USB ports on your PC as well.

Footstep 10. Loadthe firmware filesinto Odin. Click theAP push on Odin and the select the .tar.md5 file from above. See the screenshot below to discover how the Odin window will expect similar after you have loaded the files.

• Click on BL tab, and select the file beginning with BL text.
• Click on AP tab, and select the file beginning with AP text.
• Click on CP tab, and select the file starting time with CP text.
• [Different!] Click on CSC tab, and select the file starting time with HOME_CSC text. If HOME_CSC file isn't available, and then select the file outset with CSC text.

Near CSC file: Using the HOME_CSC file won't reset your device, and data on the telephone shouldn't be deleted. Notwithstanding, when we select a regular CSC file, and it results in CSC on the device existence different than that in CSC file, your phone will be formatted automatically. Yous can even choose to ignore loading the CSC file, that may exercise alright likewise. But if it doesn't work out, repeat the whole procedure and select CSC file this time around.

• Info: When you load files, Odin checks the md5 sum of firmware file, which takes time. So, merely wait until that's done and the firmware file is loaded. Don't worry if Odin gets unresponsive for a while, it's normal. Binary size volition also bear witness upwardly in Odin.

Step 11.Click on Options tab, and brand sureRe-partition checkbox isNOT selected. Don't use the PIT tab, ever.

Go dorsum to the Log tab now, as it volition bear witness the progress of the firmware installation when you hit the start button in the next step.

Footstep 12. Verify that everything is okay equally mentioned above. When satisfied, click theStart button on Odin now to showtime flashing the firmware on your device.

Await till installation is finished, after which your device will reboot automatically. Y'all'll getPassmessage every bit shown below upon successful installation from Odin.

Some errors you may run into, and with corresponding solution.

• If Odin gets stuck atsetup connection, and then you lot need to do this all again. Disconnect your device, close Odin, kicking device into download mode again, open Odin, and and so select the file and flash it again every bit said higher up.
• If you lot getFail in the top left box, so also yous need to flash the file once again as stated just above.

---

Done!

Permit us know if you run into any problems in installing the Ane UI-toting Android 9 Pie update on your Milky way Notation 8.

rayject1953.blogspot.com

Source: https://nerdschalk.com/how-to-download-android-9-pie-update-on-galaxy-note-8/

Share this post